Atomic Solutions Sdn Bhd
33-01, Jalan Sagu 18,
Taman Daya,
81100 Johor Bahru,
Johor, Malaysia.
+6010-820 9965
+6018-989 9965
+607-362 1965
Kuala Lumpur Branch
21-3, Dataran Mutiara, Jalan 7/4, Taman Serdang Jaya, 43300 Seri Kembangan, Selangor, Malaysia.
+6018-989 9965
+607-362 1965

Penang Branch
8, 1st Floor, Tingkat Bukit Minyak 9, Taman Bukit Minyak, 14000 Bukit Mertajam, Pulau Pinang, Malaysia.
+6018-989 9965
+6011-3670 9965
+607-362 1965

Pelco Precision Wire Saw

Previous 8 / 10 Next

Pelco Precision Wire Saw Instruments TEDPELLA

Precision cutting for delicate samples


The PELCO® Precision Wire Saw™ is capable of cutting a variety of materials while minimizing damage from the cutting process using a gentle lapping action. This gentle action combined with high precision and low kerf damage makes the Diamond Wire Saw ideal for slicing samples where minimizing mechanical damage and precise positioning of the cut are critical. This wire saw is an updated version of the South Bay Technology Model 850 Abrasive Slurry Saw / Wire Saw.
The saw can be used either with abrasive slurry or with a Diamond Embedded Wire. It can cut brittle samples, which would otherwise be damaged using Low Speed Diamond Saws. With precision and control, the Diamond Wire Saw can cut materials such as sapphire, silicon, glass and germanium as well as tough materials such as tungsten, aluminum, brass and steel. It is highly useful for cutting fragile crystals, substrates with delicate layers, or any material that might otherwise be damaged using other cutting methods.
A variety of sample holders and fixtures are available for use with the PELCO® Precision Wire Saw™ and enable it to cut virtually any sample geometry without difficulty. Oriented crystals, awkward geometries, or flat samples can all be cut using the various holders available. An inspection microscope attachment is also available, for extra precision and additional ease for alignment of difficult samples. The PELCO® Precision Wire Saw™ can also be used as a string saw to cut water-soluble crystals. Whatever the application, the Wire Saw can be a valuable tool in the preparation of all sample types. With the addition of precision goniometer fixtures, it is also ideal for working with single crystals and optical components.
The saw comes equipped with a recirculating system for abrasive slurry or coolant. It consists of a peristaltic pump and a continuously mixed reservoir. It allows for continuous recirculation of cutting slurry when using plain stainless wire blades or cutting fluid when using diamond wire blades.


configuration for wax mounts


saw with optional 3-axis goniometer


saw with optional vise holder

Standard configuration for wax mounts


With optional 3-axis Goniometer


With optional Vise Holder



Overall Dimensions:

28 x 9 x 11'' L x W x H


100-240 VAC 50/60 Hz Universal Power

Maximum Sample Diameter:

2.5'' (63mm)

Wire Speed:

25-250 in/sec (40-475 RPM)

Cross Feed Range:

2'' (50mm) maximum

Micrometer Feed:

0-25mm at 0.01mm increments



  • Very gentle, low damage cutting for many types of materials and single crystals

  • Easily replaceable wire blades with adjustable tensioning mechanism

  • Recirculating slurry/coolant system included

  • ETL and CE certified

  • A wide variety of sample holders allow mounting of virtually any sample shape

  • Multi-axis Precision Goniometer available for single crystal cutting and other demanding tasks

  • Optional Inspection Microscope available

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version
Subscribe Newsletter