Atomic Solutions Sdn Bhd
33-01, Jalan Sagu 18,
Taman Daya,
81100 Johor Bahru,
Johor, Malaysia.
+6010-820 9965
+6018-989 9965
+607-362 1965
+60189899965
Kuala Lumpur Branch
21-3, Dataran Mutiara, Jalan 7/4, Taman Serdang Jaya, 43300 Seri Kembangan, Selangor, Malaysia.
+6018-989 9965
+607-362 1965

Penang Branch
8, 1st Floor, Tingkat Bukit Minyak 9, Taman Bukit Minyak, 14000 Bukit Mertajam, Pulau Pinang, Malaysia.
+6018-989 9965
+6011-3670 9965
+607-362 1965

PELCO® Dimpler™ for TEM Thinning of Specimens

Previous 2 / 10 Next

PELCO® Dimpler™ for TEM Thinning of Specimens   Instruments TEDPELLA


Description:

The PELCO® Dimpler™ is the latest model in the evolu­tion of the Dimpler line formerly available from South Bay Technology and provides Automated Precision Thinning of Specimens for TEM Analysis, for deprocessing and failure analysis, and similar applications where targeted fine polishing is required. It is a precision electro-mechanical metallographic lapping in­strument that will continuously monitor and control dimpling parameters and accurately terminate at a preset specimen thickness. This electronic and mechanical integration has added repeatability and reliability to the dimpling process, as well as automation.
 
Active monitoring of the Z-position, feedback-controlled damping, and automated controls for determining termination of processing work together to provide repeatable, reliable results in sample preparation.
 
Feature:

  • High Accuracy

  • High Sensitivity

  • Precision polishing system for TEM specimen thinning
     

Termination

Process termination can be determined using the built-in timer, or by the Z Position. When using Z Position termination, the timer counts to measure the total time elapsed until the Z Position is reached. This is useful for creating process recipes for various sample types. Four factors improve the overall stability during processing, and the termination accuracy:

  1. Non-Contact Position Sensor

  2. Tool Phase Sensor

  3. No external measuring device

  4. Magnetically coupled arm damping

 

Damping

Damping of the arm is accomplished by using position information from the Non-Contact Position Sensor, processing it and feeding it back to the arm motor, which controls the up/down force of the arm. The position sensor and the processing circuit is fast enough to actively dampen any vibration the arm may experience. Since the damping force is magnetically coupled to the arm there is no mechanical play in the system, allowing damping response on the sub-micrometer level. Damping is adjustable from zero damping to stiff damping.
Damping offers three significant attributes:

  1. Vibrations that can crack thin specimens are greatly reduced.

  2. Keeps tools round, negating excess impacts, providing more accurate Z position control.

  3. Tool gently contacts the specimen when the arm is lowered.



Automated Controls

Automated features make the dimpling process more repeatable and easier to use. Tools are raised and lowered at the touch of a button; dimpling force, damping force, fine balance, and Z offset (termination point) all are set from the front panel.
Once dimpling has begun no monitoring is necessary. After the initial specimen thickness has been measured, the specimen is mounted and the user simply selects a dimple depth and begins dimpling. The precise Z position of the tool/surface interface is continuously displayed while dimpling with any tool. When the selected dimple depth is reached the PELCO® Dimpler™ controls will automatically raise the arm then stop the tool rotation, specimen rotation, and clock timer.


Specimen Mounting

Different mounts are available depending on the size and type of sample. TEM specimens are generally mounted on optically smooth sapphire flats. The low thermal mass of the flat reduces mounting and dismounting times and the smooth surface allows the dimpled specimens to be easily removed. The hardness of sapphire limits damage if specimens are accidentally perforated due to operator error. The retainer ring which secures the sapphire flat also serves as a slurry reservoir. This platen set is used with the traditional Dimpler tools. For larger specmens for surface analysis or delayering a separate, shorter magnetic base and platen set is used with larger diameter tools. These were developed for delayering and deprocessing.

 


PELCO® Video Alignment Microscope (VAM)

 

83050

The PELCO® Video Alignment Microscope is an essential accessory for the PELCO® Dimpler™, particularly for deprocessing/delayering and site-specific polising applications. It allows easy targeting of an area of interest, and precise control of the position, size, and shape of the bottom of the dimple or thin area of the specimen. It is particularly useful for selective surface polishing and delayering applications, where the low point and planarity of the polished area must be controlled to reveal the feature of interest. The VAM consits of a microscope optical system with a TFT display, a post corresponding precisely to the base mount on the PELCO® Dimpler™ that is aligned to the optic axis of the microcope, a reticle to allow precise targeting of a particular area using the adjustable base, and an X-Y stage for precision alignment to the area of interest.


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version
Subscribe Newsletter