33-01, Jalan Sagu 18,
Taman Daya,
81100 Johor Bahru,
Johor, Malaysia.
+6018-989 9965
Previous | 1 / 6 | Next |
RAMOS E/M Series Raman Spectrometer
3D scanning laser Raman microscope for research grade optical microscopes allowing the realization of the following light microscopy methods:
The innovative approach to system design of Raman spectrometers ensures extremely high temperature and temporal stability of spectral measurements.
All components of RAMOS E200 system are fully integrated within an optical microscope providing compactness and mobility of the system.
In RAMOS M350, M520, M750 systems external imaging spectrographs are connected via optical fibers.
Raman measurements with the RAMOS E/M Series systems can be started in several minutes by turning a system key.
1. High resolution colour video camera for a sample observation
2. Optical microscope
3. Raman optical module
4. Automated 3–position turret with mirrors for input / output radiation
5. Confocal laser microscope module (“Reflection” module)
6. Two-channel imaging spectrometer
7. XY galvano mirror scanner
8. Z piezo sc§Ñnner
9. Automated microscope stage
Confocal Raman microscope with scanning speed of 1000 x 1000 pixels within total acquisition time of 3 sec
Fast raster and start-stop scanner operational modes. Spatial resolution of confocal images (100x, NA = 0.95)
Laser wavelength, nm |
XY - plane resolution, nm |
Z (axial) resolution, nm |
473 |
390 |
550 |
532 |
440 |
620 |
633 |
520 |
730 |
785 |
650 |
910 |
Simultaneous 2D / 3D laser confocal and Raman imaging with full spectra saving in each point
Confocal imaging of deep sample layers
Ultra-fast scanning with Galvano-mirrors
High-performance optics ensures super system sensitivity and high signal-to-noise ratio (S/N ratio)
Wide spectral range, ultimate accuracy of Raman shift measurements, high spectral resolution
Fast system configuration changing (lasers and filters switching) without additional system alignment
High-precision spectrometer calibration