The Principle of Spectroscopy & Microspectrophotometer

UV-visible-NIR Spectroscopy

spectrophotometer is a device measures the intensity of electromagnetic energy at each wavelength of light in a specified region.   A UV-visible-NIR spectrophotometer, such as used in CRAIC microspectrophotometers, operate in the ultraviolet, visible and near infrared regions.  As described below, the spectrophotometer consists of a light source, a way to focus light onto the sample, a method to collect the light from the sample, a monochromator to separate the light into its component wavelengths and a detector to measure the intensity of light at each wavelength.


How does a Spectrophotometer Work?

 

UV-visible-NIR spectrophotometer

 

Figure a
 

The spectrophotometer is an optical instrument for measuring the intensity of light relative to wavelength. Electromagnetic energy, collected from the sample, enters the device through the aperture (yellow line) and is separated into its component wavelengths by the holographic grating. Simply put, the grating acts to separate each color from the white light.

The separated light is then focused onto a CCD array detector where the intensity of each wavelength (or each color if in the visible region) is then measured by a pixel of the array. The CCD is then read-off to a computer and the result is a spectrum which displays the intensity of each wavelength of light.

An example would be a spectral measurement of the visible range which we perceive of as color.  White light would enter the monochromator and be separated into a rainbow of each color.  This rainbow, with blue light on one end and red on the other, would be focused on to the CCD.  Each pixel of the CCD would then measure the intensity of a color. 

The results would be a spectrum such as the one shown below.  As shown in figure b, the blue pixels emit blue light, the green pixels emit in the green portion of the spectrum and the red pixels emit red light.

 

Spectra of red, green and blue pixels of an OLED display using a Spectrophotometer

Figure b


Why use a Spectrophotometer?
 

The spectrophotometer allows the researcher to acquire spectra of by illuminating a sample and measuring the intensity of light returned from the sample relative to its wavelength.  With this non-destructive technique, measurements can be made with light transmitted through the sample, reflected from it or even when the sample is made to emit light by processes such as photoluminescence.  The UV-visible-NIR range is especially important as more substances...even colorless ones...absorb in the UV than in the visible and infrared regions. Therefore, a UV -visible-NIR range spectrophotometer is very useful for analysis of most samples for any application.

Spectrophotometers are used by analytical laboratories to identify microscopic samples ranging from the kinetics, matching colour (as shown figure c), the qualification of gems and minerals, the determination of colour of ink or paint bu process chemist.
 

What a Spectrophotometer can reveal

Figure c
 

CRAIC Technologies builds microspectrophotometers.  These devices integrate the spectrophotometer with a microscope to enable one to measure the spectra but of microscopic sample areas.  Microspectrophotometers are also used to measure fluorescence, photoluminescence, thin film thickness, measurementsmicrocolorimetry, for imaging and much more.  Microspectrophotometers are used for diverse applications such as colorimetry of pixels on flat panel displays, reflectometry of vitrinite coal and thin film thickness measurements. 



What is a Microspectrophotometer (MSP)?

 
Spectroscopy of microscopic samples

The microspectrophotometer is a scientific instrument used to measure the spectra of microscopic samples.  For example, an engineer in a semiconductor facility will use it to measure the thickness of thin films while a forensic scientist will use one to analyze the dye in a single textile fiber, as shown figure 1 or a chemist will use it to measure the spectrum of a nanocrystals. 

msp_test_fiber.jpg (1280กม1024)


Figure 1


CRAIC Technologies™ builds a microspectrophotometer that combines a UV-visible-NIR optical microscope with a UV-visible-NIR range spectrophotometer.  While a standard spectrophotometer is designed to measure samples on the order of 1 x 1 centimeters, the microspectrophotometer is able to measure samples on the order of 1 x 1 micrometers...much smaller than the thickness of a human hair.

As shown in the diagram on the Figure 2, the instrument combines a UV-visible-NIR range optical microscope with a UV-visible-NIR range spectrophotometer.  In this figure, the instrument is configured for transmission microspectroscopy.  The light from the lamp housing is focused onto the sample on the microscope stage (I0).  The light that is transmitted through the sample, is collected by the objective (I) and focused onto the spectrophotometer entrance aperture.

Microspectrophotometer


Figure 2

The UV-visible-NIR microspectrophotometer is a very flexible instrument and can be configured to measure the transmittance, absorbance, reflectance, polarization, Raman, fluorescence and photoluminescence microspectra™ of sample areas smaller than a micron. Microspectrophotometers are also capable of non-contact microspot thin film thickness measurement and colorimetry. Because UV-visible-NIR microspectrometers are so flexible, they are used in many fields of research and industry.

There are also different types of microspectrophotometers.  Some of these instruments are designed to be added to standard microscopes or probe stations while others are fully integrated, purpose-built instruments. As such, microspectrophotometers have greater spectral ranges, better results and several features that are not possible with add-on units.



Why use a Microspectrophotometer?

The microspectrophotometer allows the scientist or engineer to acquire spectra of extremely small sample areas non-destructively and without physically touching the sample. Measurements can be made while light is transmitted through the sample, reflected from it, scattered from it or even when the sample is made to emit light: as shown in Figure 3 the image OLED pixels to the left. The UV-visible-NIR range is especially important as more substances...even colorless ones...absorb in the UV than in the visible and infrared regions. Therefore, a UV microscope spectrometer is very useful for analysis of most samples for any application.
 


Why Use a Microspectrometer

Figure 3


Microspectrophotometers are easily employed in many different fields and are found in both scientific laboratories and production facilities. In the production environment, for example, they are used for quality control of everything from color masks in flat panel displays to the thickness of films on semiconductor integrated circuits.

Microspectrometers are used by analytical laboratories to identify and quantify microscopic samples ranging from the microfluidic kinetics, matching fibers or paints by a forensic chemist, the qualification of gems or coal by a geologist, the determination of the color of ink or paint by a process chemist and even the analysis of great works of art by conservators. As such, the microspectrometer is a highly flexible instrument with many different applications.


 

 
 

Switch to Mobile Version
Subscribe Newsletter